地砖铺贴德式工艺流程
    英文回答：
    German Tiling Process.
    The German tiling process is a highly specialized and precise method of installing tiles that results in a durable and aesthetically pleasing finish. The process involves several key steps, each of which must be executed with care and attention to detail.
    1. Preparation.
    The first step is to prepare the substrate by ensuring that it is level, smooth, and free of any defects. This involves screeding the surface and applying a primer to improve adhesion.
    2. Measuring and Marking.3tiles
    Once the substrate is prepared, the next step is to measure and mark the layout of the tiles. This is done using a laser level and chalk lines to ensure accuracy. The layout should ta
ke into account the size and shape of the tiles, as well as any patterns or designs that are being created.
    3. Mixing the Adhesive.
    The next step is to mix the adhesive according to the manufacturer's instructions. The adhesive should be applied evenly to the substrate using a notched trowel.
    4. Laying the Tiles.
    The tiles are then laid on the adhesive and pressed into place using a float. The tiles should be spaced evenly and aligned with the layout lines.
    5. Grouting.
    Once the tiles are laid, they must be grouted. Grout is a mixture of cement, sand, and water that fills the spaces between the tiles and creates a watertight seal. The grout should be applied using a grout float and allowed to set for the specified amount of time.
    6. Sealing.
    The final step is to seal the grout and tiles. This helps to protect them from moisture and staining. The sealer should be applied according to the manufacturer's instructions.
    中文回答：
    德式地砖铺贴工艺。
    德式地砖铺贴工艺是一种高度专业化且精准的铺贴方法，可带来持久美观的装饰效果。该工艺涉及几个关键步骤，每个步骤都必须仔细执行并注重细节。
    1. 准备工作。
    第一步是通过确保基层平整、光滑且无任何缺陷来准备基层。这包括用刮尺刮平表面并涂抹底漆以提高附着力。
    2. 测量和标记。
    准备基层后，下一步是测量和标记瓷砖的布局。使用激光水平仪和粉线进行此操作以确保准确性。布局应考虑瓷砖的尺寸和形状，以及所创建的任何图案或设计。
    3. 混合粘合剂。
    下一步是根据制造商的说明混合粘合剂。应使用带缺口抹刀将粘合剂均匀地涂抹在基层上。
    4. 铺贴瓷砖。
    然后将瓷砖铺在粘合剂上，并用抹子压入到位。瓷砖应均匀间隔并与布局线对齐。
    5. 填缝。
    瓷砖铺好后，必须填缝。填缝剂是由水泥、沙子和水混合而成的，用于填充瓷砖之间的空间并形成防水密封。应使用填缝抹刀涂抹填缝剂并放置指定时间使其凝固。
    6. 密封。
    最后一步是密封填缝剂和瓷砖。这有助于防止它们受潮和染。应根据制造商的说明涂抹密封剂。