纯棉活性直喷印花工艺流程
    英文回答：
    The process of pure cotton reactive direct printing involves several steps to achieve high-quality prints on cotton fabrics. Here is a detailed explanation of the process:
    1. Design and preparation: The first step is to create or choose a design that will be printed on the fabric. This can be done using computer software or by hand. Once the design is finalized, it is prepared for printing by converting it into a digital format.
    2. Pretreatment: Before printing, the cotton fabric needs to undergo pretreatment to ensure better ink absorption and color fastness. This involves washing and treating the fabric with chemicals to remove impurities and create a smooth surface for printing.
    3. Printing: The prepared fabric is then fed into a digital printing machine, which uses reactive inks to directly print the design onto the fabric. The ink is applied in the desired colors and patterns, creating vibrant and detailed prints. The printing process can be adjuste
d to achieve different effects, such as gradient colors or special textures.
    4. Drying and fixation: After printing, the fabric needs to be dried to remove excess moisture and fix the ink onto the fibers. This can be done through heat treatment or by air drying, depending on the specific requirements of the ink and fabric.
    5. Washing and finishing: Once the fabric is dry, it undergoes a washing process to remove any residual chemicals or excess ink. This helps to enhance the color fastness and softness of the fabric. After washing, the fabric can be finished with additional treatments, such as softening or ironing, to improve its overall appearance and feel.
    Overall, the process of pure cotton reactive direct printing involves design preparation, pretreatment, printing, drying and fixation, and washing and finishing. Each step is crucial to ensure the final product meets the desired quality standards.
    中文回答：
    纯棉活性直喷印花工艺流程包括以下几个步骤，以在棉织物上实现高质量的印花效果。下
面是对每个步骤的详细解释：
    1. 设计和准备，第一步是创建或选择将印在织物上的设计。可以使用计算机软件或手工完成设计。一旦设计确定，就需要将其转换为数字格式，以便进行印刷前的准备工作。
    2. 预处理，在印刷前，棉织物需要经过预处理，以确保更好的墨水吸收和牢度。这包括使用化学品清洗和处理织物，以去除杂质，并为印刷创造一个平滑的表面。
reactive to
    3. 印刷，然后将处理过的织物送入数字印刷机，该机使用活性墨水直接将设计印刷在织物上。墨水以所需的颜和图案应用，形成鲜艳而细致的印花效果。印刷过程可以调整以实现不同的效果，如渐变彩或特殊纹理。
    4. 干燥和固定，印刷完成后，织物需要干燥以去除多余的水分，并将墨水固定在纤维上。这可以通过热处理或自然风干来完成，具体取决于墨水和织物的要求。
    5. 洗涤和整理，织物干燥后，需要进行清洗过程，以去除任何残留的化学品或多余的墨水。这有助于提高织物的牢度和柔软度。洗涤后，可以对织物进行额外的整理处理，如柔软或熨烫，以改善其整体外观和手感。
    总的来说，纯棉活性直喷印花工艺流程包括设计准备、预处理、印刷、干燥和固定、洗涤和整理等步骤。每个步骤对于确保最终产品达到预期的质量标准都至关重要。