电子元器件存放通用规范
Electronic Component Storage General XXX
1.n History
Document XXX: Electronic Component Storage General XXX
Document Type: Process Document
XXX: XXX
electronic去掉ic是什么Drafted by: XXX
Date of Draft: July 2013
2.Document Review
Date of Release: July 2013
Date of n: July 2013
Approved by:
Reviewed by:
Signed by:
Drafted by: XXX
3.Purpose
XXX standardize the storage of electronic components。ensure their quality。and ce product XXX.
4.Scope
This XXX to the storage and management of electronic components.
5.Specific Requirements
5.1 Storage
Storage Requirements: Use a nal XXX。dryness。and non-XXX。lighting。air n。and clear passage。Smoking。XXX strictly prohibited。and XXX.
XXX:
1) For items with no special requirements (qualified raw materials。semi-finished products):
Storage ns: shaded。room temperature。good XXX。and dryness.
Storage d:
Electronic components: 12 months
Plastic parts: 12 months
Hardware parts: 6 months
Packaging materials: 12 months
Finished products: 12 months
2) For items with special requirements。store them according to the storage requirements (see table below).
Material Type
Solder paste。glue
Electronic components
XXX
2-10℃
20±5℃
XXX
No special requirements
40%~70%
Storage Height and Container
Refrigerator。XXX
XXX warehouse。standard packaging
Storage d
According to the shelf XXX
12 months
5.2 n
XXX:
The electronic warehouse must have an anti-XXX wear anti-XXX-XXX。Materials should be stored in XXX should have clear warning signs or safety signs。Materials should be nea
tly arranged。and storage cards XXX accounts。materials。and cards。Items should not be directly stored on the ground and should have XXX。Materials should be stacked with smaller items on top and larger items on the bottom。lighter items on top of heavier ones。Only one type of material should be placed on each pallet。The stacking height should follow special requirements but should not exceed 160cm。For items that require anti-static n。they must be stored in anti-static bags or anti-XXX according to the actual XXX.